Bus Pirate v3.6 universal serial interface

Bus Pirate v3 is a universal bus interface that talks to electronics from a PC serial terminal. Get to know a chip without writing code. Eliminates a ton of early prototyping effort with new or unknown chips. This board provides 1-Wire, I2C, SPI, JTAG, asynchronous serial (UART), MIDI, PC keyboard, HD44780 LCDs, and generic 2- and 3-wire libraries for custom protocols.

Artikelnummer
8-102990038
Hersteller
SeeedStudio
Inhalt
1 Stück

35,70 (Grundpreis: 35,70 € / Stück)

inkl. 19 % MwSt. zzgl. Versandkosten


Sofort versandfertig, Lieferzeit 48h


Features

  • USB interface, USB powered

  • 5-volt tolerant pins-0-6volt measurement probe

  • 1Hz-40MHz frequency measurement

  • 1kHz-4MHz pulse-width modulator, frequency generator

  • On-board multi-voltage pull-up resistors

  • On-board 3.3volt and 5volt power supply with software reset

  • Macros for common operations

  • Bus traffic sniffers (SPI, I2C)

  • Transparent USB to serial bridge mode

  • 10Hz-1MHz low-speed logic analyzer

  • Custom support in AVRDUDE,Flashrom,OpenOCD

  • AVR STK500 v2 programmer clone

  • Scriptable from Perl, Python, etc.

  • A bootloader for easy USB firmware updates

  • Uses DP6037 standard PCB layout

  • Open source (CC 0/Public Domain)

Es ist noch keine Bewertung für Bus Pirate v3.6 universal serial interface abgegeben worden.
Artikel bewerten
1
1
Name Kommentar Sicherheitscode Captchar Image
Nach oben