Pololu 5V, 600mA Step-Down Voltage Regulator D24V6F5

The compact (0.4″ × 0.5″) D24V6F5 switching step-down (or buck) voltage regulator takes an input voltage between 7 V and 42 V and efficiently reduces it to 5 V while allowing for a maximum output current of 600 mA. The pins have a 0.1″ spacing, making this board compatible with standard solderless breadboards and perfboards.

Artikelnummer
15-2107
Hersteller
Pololu
Inhalt
1 Stück

6,90 (Grundpreis: 6,90 € / Stück)

inkl. 19 % MwSt. zzgl. Versandkosten


Sofort versandfertig, Lieferzeit 48h


Overview

These buck (step-down) voltage regulators generate lower output voltages from input voltages as high as 42 V. They are switching regulators (also called switched-mode power supplies (SMPS) or DC-to-DC converters) and have a typical efficiency between 80% to 90%, which is much more efficient than linear voltage regulators, especially when the difference between the input and output voltage is large.

 

 

Dimensions

Size: 0.4″ × 0.5″ × 0.1″1
Weight: 0.5 g1

General specifications

Minimum operating voltage: 6.0 V2
Maximum operating voltage: 42 V
Maximum output current: 600 mA
Output voltage: 5 V
Reverse voltage protection?: N
Maximum quiescent current: 2 mA3

Identifying markings

PCB dev codes: reg04b
Other PCB markings: 0J7034

Notes:

1
Without included optional headers.
2
For small loads; input voltage must be at least 7 V to get the full 600 output.
3
While enabled (SHDN = HIGH) with no load. Current draw is approximately 20 µA when SHDN = LOW.
Es ist noch keine Bewertung für Pololu 5V, 600mA Step-Down Voltage Regulator D24V6F5 abgegeben worden.
Artikel bewerten
1
1
Name Kommentar Sicherheitscode Captchar Image
Nach oben