Based on high performance PAH8001EI process
SWD interface reserved
I2C standard interface
Ultra-low power consumption
Grove connector compatible
(Grundpreis: 29,90 € / Stück)
inkl. MwSt. zzgl. Versand
This module features a fixed-gain, 38 kHz modulated IR sensor and a corresponding IR LED with oscillator circuit to make a tiny proximity sensor. This low-brightness version draws an average of 8 mA at 5 V and has a typical sensing range up to approximately 12 inches (30 cm).
(Grundpreis: 5,95 € / Stück)
Der neue Umweltsensor BME280 von Bosch Sensortec vereinigt Druck, Temperatur und Luftfeuchte Messung auf einem winzigen Chip. Mit Hilfe dieses Chips ist es ganz einfach Wetterstationen etc. aufzubauen. Als Schnittstelle unterstützt der Chip sowohl I2C als auch SPI. Zudem haben wir dem Breakout board einen Stecker für das Grove System von Seeedstudio verpasst so das er dort sehr einfach eingebunden werden kann.
The BME280 is a pretty new environmental sensor from Bosch measuring Pressure, Humidity and Temperature on one chip with pretty high precision. The sensor communicates through SPI and I2C. Actually we are still working on our own software but until this is ready you can use some of the libraries out there. We put also an Grove connector on the breakout to embed it into the SeeedStudio Grove Ecosystem. PLEASE NOTE the board is not 5V tolerant!!
(Grundpreis: 8,90 € / Stück)
Das EE893 Sensor Module wurden speziell für OEM-Anwendungen und anspruchsvolle Umgebungsbedingungen konzipiert. Die Mehrpunkt CO2- und Temperaturjustage sorgt für eine ausgezeichnete Messgenauigkeit über den gesamten Temperatureinsatzbereich.
(Grundpreis: 79,50 € / Stück)
(Grundpreis: 82,00 € / Stück)
This 3-axis Accelerometer module is based on MMA7660FC with Digital Output I2C. This Module can be used for sensing data changes, product orientation, and gesture detection through an interrupt pin (INT).It is a very low power, low profile capacitive MEMS sensor.
(Grundpreis: 9,90 € / Stück)
Based on the excellent ADXL-345, this digital 3-axis accelerometer has excellent EMI protection. Its variable output makes it suitable for a wide range of applications:
• HDD shock protection
• Vibration sensor
• Game controller input
• Smart vehicles
• Anywhere you need to obtain motion-sensing & orientation information.
The 80cm Infrared Proximity Sensor is a General Purpose Type Distance Measuring Sensors, this sensor takes a continuous distance reading and returns a corresponding analog voltage with a range of 10cm (4") to 80cm (30"). Can be used in TVs,personal computers ,cars and so on.
(Grundpreis: 16,40 € / Stück)
(Grundpreis: 12,90 € / Stück)
Alcohol sensor is semiconductor sensor for alcohol detection. It has good sensitivity and fast response to alcohol, suitable for portable alcohol detector.
(Grundpreis: 7,07 € / Stück)
This module is based on the I2C light-to-digital converter TSL2561 to transform light intensity to a digital signal. Different from traditional analog light sensor, as Grove - Light Sensor, this digital module features a selectable light spectrum range due to its dual light sensitive diodes: infrared and full spectrum.
You can switch between three detection modes to take your readings. They are infrared mode, full spectrum and human visible mode. When running under the human visible mode, this sensor will give you readings just close to your eye feelings.
(Grundpreis: 8,75 € / Stück)
(Grundpreis: 19,90 € / Stück)
(Grundpreis: 16,90 € / Stück)
(Grundpreis: 75,90 € / Stück)
The Grove - Gas Sensor(MQ2) module is useful for gas leakage detecting(in home and industry). It can detect LPG, i-butane, methane, alcohol, Hydrogen, somke and so on. Based on its fast response time. measurements can be taken as soon as possible. Also the sensitivity can be adjusted by the potentiometer.
(Grundpreis: 6,23 € / Stück)
The Grove - Gas Sensor module is useful for gas leakage detecting(in home and industry). It can detect LPG, i-butane, methane, alcohol, Hydrogen, somke and so on. Measurements can be taken as soon as possible based on its fast response time. Also the sensitivity can be adjusted by the potentiometer.
The Grove - Gas Sensor(MQ5) module is useful for gas leakage detecting(in home and industry). It can detect LPG, natural gas, town gas and so on. Based on its fast response time. measurements can be taken as soon as possible. Also the sensitivity can be adjusted by the potentiometer.
Grove-Gas Sensor (O₂) is a kind of sensor to test the oxygen concentration in air, which is based on the principle of the electrochemical cell to the original work. You can know clearly the current oxygen concentration when you output voltage values proportional to the concentration of oxygen and refer to the oxygen concentration linear characteristic graph. It’s very suitable for detecting oxygen concentration in the environment protection.
(Grundpreis: 57,19 € / Stück)
GSR stands for galvanic skin response, is a method of measuring the electrical conductance of the skin. Strong emotion can cause stimulus to your sympathetic nervous system, resulting more sweat being secreted by the sweat glands. Grove - GSR allows you to spot such strong emotions by simple attaching two electrodes to two fingers on one hand. It an interesting gear to create emotion related projects like sleep quality monitor.
(Grundpreis: 15,49 € / Stück)
The Hall Sensor measures the Hall Effect, which is a production of a voltage difference across an electrical conductor, transverse to an electric current in the conductor as well as a magnetic field perpendicular to the current. The output of the continuous-time switch Hall sensor on this Twig switches low and turns on when a magnetic field (south polarity) perpendicular to the Hall sensor exceeds the BOP threshold, and it switches high and turn on when the magnetic field disappears.
(Grundpreis: 7,40 € / Stück)
Up to 1ppm high sensibility, built with VOC sensor WSP2110 and detects HCHO, Benzene,Toluene, Alcohol etc. It is Grove connector compatible and easy to use
This module is based on the color sensor TCS3414CS with digital output I2C. Based on the 8*2 array of filtered photodiodes and 16-bits analog-to-digital converters, you can gain the color chromaticity of ambient light or the color of objects. Of the 16 photodiodes, 4 have red filters, 4 have green filters, 4 have blue filters and 4 have no filter(clear). With the synchronization input pin, external pulsed light source can provides precise synchronous conversion control.
(Grundpreis: 17,90 € / Stück)
Grove - IMU 10DOF is based on MPU-9250 and BMP180, it combines a 3-axis gyroscope, 3-axis accelerometer, 3-axis magnetometer and barometer in standard Grove module. Total 10 degrees of freedom make it suitable for mobilephone, aircraft, smart watch etc.
(Grundpreis: 15,48 € / Stück)
This Grove-Infrared temperature sensor is a non-contact temperature measure model.The sensor is composed of 116 elements of thermocouple in series on a floating micro-membrane having an active diameter of 545μm and with blacken surface to absorb the incident thermal infrared radiation, which induces a voltage response at output terminals.
This IR Distance Interrupter features a high-sensitivity RFR-359F photoreflector to perform distance detection function. The photoreflector consists of a GaAs infared light emitting diode and a silicon planar phototransistor. When the infrared light emitted by the emitter gets reflected on a surface that blocked it, the phototransistor can pick up the signal for distance calculation. This module is panel mounted so that you can easily implement it on the surface of robots or other projects without wiring clutter. Also a potentiometer for adjustment and an indicator LED are arranged on the back for easy and clear use.
(Grundpreis: 5,39 € / Stück)
The Light sensor module uses the GL5528 photoresistor to detect the light intensity of the environment. The resistance of the sensor decreases when the light intensity of the environment increases. The chip LM358 is used as a voltage follower to enable you get a accurate data.
(Grundpreis: 2,86 € / Stück)
What does “P” mean? “P” is for “panel mount” in this product. This Grove – Light Sensor (P) is a sister version of original Grove – Light Sensor. They are identical except the Grove connecter is moved to the back so that you can easily use it as a neat and wire-free human interface device.
(Grundpreis: 2,49 € / Stück)
Grove - Luminance Sensor using APDS-9002 as lumens Sensor, provide the linear transform lumen intensity for the output voltage levels. And APDS-9002 spectrum and human eye is extremely close to. Very suitable for application in the field of human intelligence.
(Grundpreis: 5,45 € / Stück)
Grove- Piezo Vibration Sensor is suitable for measurements of flexibility, vibration, impact and touch. The module is based on PZT film sensor LDT0-028. When the sensor moves back and forth, a certain voltage will be created by the voltage comparator inside of it.
Therefore, outputs high & low levels. In spite of the fact that it has a high receptivity for strong impacts, a wide dynamic range (0.001Hz~1000MHz) also guarantees an excellent measuring performance. Finally, you can adjust its sensitivity by adjusting the potentiometer with a screw.
Grove is a modular electronic platform for quick prototyping. Every module has one function, such as touch sensing, creating audio effect and so on. Just plug the modules you need to the base shield, then you are ready to test your idea buds.
This Grove - Starter Kit for Arduino is upgraded version of the Grove Starter Kit plus. We included more frequently encountered modules in this kit to support your concept buildup.
(Grundpreis: 49,90 € / Stück)
When we are talking about environmental sensors, we always want it to be accurate, and also easy-to-use. Now, we’ve got a really fine sensor module that has both, the Grove - Temperature&Humidity Sensor (SHT31). The SHT31 sensor could be the finest and highest-accuracy humidity sensor you can find, as it can acquire the relative humidity at only ±2% error. On the other side it also features an excellent performance in terms of temperature measurement, you can use it in some extreme conditions, like -40 degree or 125 degree, and it still keeps an accuracy of ±0.3 degree.
(Grundpreis: 13,90 € / Stück)
This product is a high accuracy temperature and humidity sensor used in home conditions. It consists of a capacitive sensor element used for measuring relative humidity and a negative temperature coefficient (NTC) thermistor used for measuring temperature. Every sensor was calibrated in an accurate humidity room. Small dimension, ultra low power consumption, more than 20m's signal transmission distance make it a good selection for various application environment. Different from Twig - Temp&Humi Sensor v0.9b, the accuracy of this module can gets up to 0.3 degree in temperature and 2% in relative humidity.
Grove - Water Sensor detects the presence of water using exposed PCB traces. The sensor is made up of interlaced traces of Ground and Sensor signals. The sensor traces are weakly pulled up using 1 MΩ resistor. The resistor will pull the sensor trace value high until a drop of water shorts the sensor trace to the ground trace. This circuit will work with digital I/O pins of Arduino or you can use it with the analog pins to detect the amount of water induced contact between the grounded and sensor traces.
(Grundpreis: 2,95 € / Stück)
Summer is coming, want to make a UV detector to know the UV index when you are under the sun? Grove – Sunlight Sensor is recommend here.
Grove - Sunlight Sensor is a multi-channel digital light sensor, which has the ability to detect UV-light, visible light and infrared light.
This device is based on SI1145, a new sensor from SiLabs. The Si1145 is a low-power, reflectance-based, infrared proximity, UV index and ambient light sensor with I2C digital interface and programmable-event interrupt output. This device offers excellent performance under a wide dynamic range and a variety of light sources including direct sunlight.
Grove - Sunlight Sensor include an on-bard Grove connector, which help you to connect it your Arduino easily. You can use this device for making some project which need to detect the light, such as a simple UV detector.
(Grundpreis: 12,36 € / Stück)
To keep the indoor plants alive and robust is not an easy task. Plants are like people, they need nutritious soil, right temperature, adequate sunshine and water for the healthy growth.
Many electronics beginners who are getting started with Arduino and love planting would start their first project of making a plant growing system.
Here we provide one-stop solution to build up your own plant care system.
Please visit our Wiki page for more information about this product. It will be much appreciated if you can help improve the documents, add more demo codes or tutorials. For technical support, please post your questions to our Forum.
(Grundpreis: 65,90 € / Stück)
Specially selected Grove modules for photon, easy to use sensors&actuators up to 8 Grove interfaces on expansion board, solder-free, include detailed handbook
(Grundpreis: 74,90 € / Stück)
Specially selected Grove modules for photon, easy to use sensors&actuators up to 8 Grove interfaces on expansion board, solder-free, include detailed handbook. Contains as add on one Grove BME280 Breakout Board by BlueberryE
(Grundpreis: 77,90 € / Stück)
This Grove-ultrasonic sensor is a non-contact distance measurement module which is compatible with the Grove system. It’s designed for easy modular project usage with industrial performance. There is also the electronic version of this module here